Oléus HoldMar 20L, anthracite gray

Specially developed coating for ships that sail with coal. Preservation of ships and steel structures.

Product description

Oléus HoldMar is a fast-drying, strongly adhesive clearing paint based on a specially modified alkyd resin and pigmented with high-quality pigments.

Applications

Oléus HoldMar quickly and easily protects bare iron, for example in the holds of ships and metal constructions.

Advantages

• Dries quickly;
• Can be applied over most existing systems;
• Strong anti-rust effect;
• Strong covering power;
• Easy to apply;
• Surface drying, no adhesion of load residues;
• Can be easily cleaned;
• Does not drip at high temperatures;
• Good adhesion to pre-treated old paint layers
• Long service life;
• Resealable packaging;
• Hard protective layer;
• Selective color scheme;
• Can be used on bare iron;
• Less chance of sagging due to fast drying.

Basic information

Instructions for use Oléus HoldMar

• Stir well before use;
• Humidity: max. 90% RH. Temperature min. 5°C; max. 30°C;
• Temperature of the paint preferably not lower than ± 10°C;
• Surface temperature should be at least 3°C above the dew point;
• Provide sufficient ventilation during application and drying.

Processing Airless sprayer

• Spray pressure: 120 -170 bar. Nozzle opening: 0.38 – 0.48 mm/ 0.015 – 0.019 inch;
• Spray angle: 50 – 80 degrees. Max. Dilute 5% with white spirit.

Processing Air spray

• Spray pressure 3 – 5 bar. Nozzle opening: ± 1.5 mm;
• Max. Dilute 5% with white spirit.

Brush/roller

• Solvent resistant brush/roller. Max. Dilute 5% with white spirit. With brush/roller application the layer thickness range is smaller.

Cleaning thinner

• Turpentine

Drying times

Recoating time without sanding; the surface must be clean and free of contaminants. If in doubt, consult your Oléus representative.

Surface preparation

The surface must be dry and free of salts, grease and other contaminants. Remove loose or damaged parts. Remove salts and contaminants by rinsing with clean fresh water, preferably under high pressure. Remove grease, oil and other soluble contamination with a suitable cleaner. Roughen intact parts by sanding or blasting. Remove rust as best as possible.

Safety information (brief)

The complete safety instructions can be found on the safety sheet. When using this product, observe local laws and regulations. Read the instructions on the label and safety sheet before use. When using, do not smoke, ventilate well and keep the product out of the reach of children.