Epifanes Epoxy Filler

Very dense, waterproof and shrink-free, two-component filler. Resistant to immersion in water. Mechanically resistant, very good shock and impact resistance. Shrink-free when drying and after curing. Easy to sand. Can be done up to a maximum of 1.5 cm in one operation. to be applied.

Packaging
750ml. – 1500ml.

Application
Wood, steel, aluminum and polyester, below and above the waterline in combination with the suitable primers. In general, this epoxy filler is used in a two-component paint system, but in combination with Epifanes Multi Marine Primer it can also be used in a one-component paint system.

Can be painted over
After 24 hours at 18°C.

Mixing ratio in weight and volume
In volume 100: 50 In weight 100: 50

Application tips
After curing, wipe off plastered parts thoroughly with Epifanes Cleaning Thinner. This prevents the sandpaper from clogging and is necessary to ensure good adhesion of the paint to the filler. Always sand this filler with 100-120 grit